only line entry on with US-122

Help for Audacity on Windows.
Forum rules
ImageThis forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
banyeli
Posts: 18
Joined: Thu Jul 14, 2011 10:46 pm
Operating System: Please select

Re: only line entry on with US-122

Post by banyeli » Fri Apr 25, 2014 4:12 pm

argh, it just made the same on qbase... so not an audacity pb... maybe with win 7?
thx for beeing there any way!!!
Ban

steve
Site Admin
Posts: 80752
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu

Re: only line entry on with US-122

Post by steve » Fri Apr 25, 2014 4:49 pm

Check that you have the most recent drivers installed: http://tascam.com/product/us-122l/downloads/
(read the "release note" document before installing the drivers)
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

banyeli
Posts: 18
Joined: Thu Jul 14, 2011 10:46 pm
Operating System: Please select

Re: only line entry on with US-122

Post by banyeli » Fri Apr 25, 2014 5:50 pm

that's what I've done (I tried the 2 different drivers proposed on the site)
I suspect now maybe a electrical problem on the usb plug...
I'll come back here if I find some kind of Windows7 or audacity problem
thx a lot!

steve
Site Admin
Posts: 80752
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu

Re: only line entry on with US-122

Post by steve » Fri Apr 25, 2014 6:58 pm

banyeli wrote:I'll come back here if I find some kind of Windows7 or audacity problem
Please let us know if you discover the cause and/or solution, whatever it happens to be. It could help other Audacity users if they encounter the same problem.
Good luck.
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

Gale Andrews
Quality Assurance
Posts: 41761
Joined: Fri Jul 27, 2007 12:02 am
Operating System: Windows 10

Re: only line entry on with US-122

Post by Gale Andrews » Fri Apr 25, 2014 8:11 pm

Also make sure you connect to an empty USB hub on the computer.

Windows 7 has sample rate and sample format settings. When using external devices you need to be sure Windows settings don't conflict with Audacity settings. Try Host: Windows DirectSound in Device Toolbar . Set Project Rate bottom left to 48000 Hz. Choose Edit > Preferences, choose "Quality" and set "Default Sample Format" to 24-bit.

Then right-click over the speaker icon by the system clock, and choose "Recording Devices". Right-click over the Tascam and choose "Properties". Then click the "Advanced" tab and put a checkmark (tick) in both Exclusive Mode boxes. Click OK and OK and restart Audacity. Then even if "Default Format" on that "Advanced" tab conflicts with your Audacity settings, Audacity should ignore the Windows Default Format and request the rate and bit depth directly from the device.


Gale
________________________________________FOR INSTANT HELP: (Click on Link below)
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual

Post Reply