Plugged Nose Narration

We all have our ideas regarding recording! Share your experience.
Forum rules
If you require help using Audacity, please post on the forum board relevant to your operating system:
Windows
Mac OS X
GNU/Linux and Unix-like
Post Reply
Gramps Curtis
Posts: 2
Joined: Mon Jan 07, 2013 8:11 pm
Operating System: Please select

Plugged Nose Narration

Post by Gramps Curtis » Mon Jan 07, 2013 8:23 pm

Sorry if I'm posting in the wrong place.
I'm 72 and have a chronic 'plugged nose' voice.
Is there some way to clean this up, while recording, or do I find another person?
I posted an mp3 file at wsprog.com/buckets1.mp3
Gramps
Hillsboro OH

steve
Site Admin
Posts: 80677
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu

Re: Plugged Nose Narration

Post by steve » Mon Jan 07, 2013 9:20 pm

Your recording level is too high. Adjust the recording level so that the blue wiggly waveform is about half the height of the track. After you have recorded, use the Amplify effect to bring the level up a bit. That will improve the sound quality.
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

kozikowski
Forum Staff
Posts: 68902
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: Plugged Nose Narration

Post by kozikowski » Mon Jan 07, 2013 9:51 pm

http://kozco.com/tech/audacity/Audacity1_record.jpg
Normal Recording.
Grab the right-hand edge of the meters and pull sideways to make them larger so you can see them.
Koz

Trebor
Posts: 9847
Joined: Sat Dec 27, 2008 5:22 pm
Operating System: Windows 8 or 8.1

Re: Plugged Nose Narration

Post by Trebor » Thu Jan 31, 2013 8:59 am

Gramps Curtis wrote:I'm 72 and have a chronic 'plugged nose' voice.
Is there some way to clean this up, while recording, or do I find another person?
I posted an mp3 file at wsprog.com/buckets1.mp3
In addition to what Steve said, the sample-rate and mp3 bit rate on your "buckets1" mp3 file are both set low ...
''buckets1'' mp3 audio file has low sample-rate and very low bit-rate.gif
MediaInfo on "buckets1.mp3"
''buckets1'' mp3 audio file has low sample-rate and very low bit-rate.gif (17.14 KiB) Viewed 2310 times
The speech is comprehensible but If, for future recordings, you increase the sample rate to at least 22050Hz (currently 11025Hz) and the mp3 bit-rate to at least 64Kbps (currently 16Kbps), then your recording will have more fidelity, less computery, (the file size will increase though).

If you are using a voice recorder device, rather that the computer, to record your voice, it may be possible to change its default settings to obtain a better quality recording, e.g. it may be possible to increase sample-rate and bit-depth in the voice recorder device's settings.
Attachments
excerpt of ''buckets1'' mp3.wav
lots of digital artifacts because bit-rate is low
(260.53 KiB) Downloaded 104 times

Post Reply