Hi
Just reviewed all Youtube, Audacity's own help and forum but still can't find out why version 2.0 (for Mac 10.5.8) no longer has menu path Analyze > Sound finder or Silence finder. I want Audacity to suggest (as it did in previous versions) silence markers to split a full cassette muti-track recording I made, which will then be exported as MP3 tracks in the normal way via the Lame encoder. Please help...
no plug-ins in menus
Forum rules
This forum is for Audacity on macOS 10.4 and later.
Please state which version of macOS you are using,
and the exact three-section version number of Audacity from "Audacity menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
This forum is for Audacity on macOS 10.4 and later.Please state which version of macOS you are using,
and the exact three-section version number of Audacity from "Audacity menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
no plug-ins in menus
Last edited by micksan on Fri Apr 24, 2015 4:01 pm, edited 2 times in total.
Reason: added topic subject
Reason: added topic subject
-
kozikowski
- Forum Staff
- Posts: 68901
- Joined: Thu Aug 02, 2007 5:57 pm
- Operating System: macOS 10.13 High Sierra
Re: ?
So your Audacity doesn't look like this...
- Attachments
-
- Picture 2.png (26.18 KiB) Viewed 6803 times
-
kozikowski
- Forum Staff
- Posts: 68901
- Joined: Thu Aug 02, 2007 5:57 pm
- Operating System: macOS 10.13 High Sierra
Re: ?
That's my Audacity 2.0 in OS-X 10.5.8.
Koz
Koz
Re: Sound finder?
No, I only see the first 3 options (contrast, plot spectrum and find clipping). My downloaded version is Audacity 2.0.0 (Unicode). Am I missing something, was it important whether I installed from the dmg or the zip? (can't remember), or to put both Audacity and the Encoder in a certain folder? (they're currently both in "Applications")...
Perhaps I should just try to install again?
Perhaps I should just try to install again?
Re: no plug-ins in menus
I've added a sensible title for this topic.
Go into the Audacity Preferences (under the Audacity Menu) and check in the "Effects" section that "Nyquist" is enabled. If it isn't, enable (select) that option and restart Audacity.
If that is not the problem, check the installation instructions for Audacity and reinstall. (Audacity will not run properly directly from the mounted DMG, it needs to be properly installed).
http://audacityteam.org/download/mac
Go into the Audacity Preferences (under the Audacity Menu) and check in the "Effects" section that "Nyquist" is enabled. If it isn't, enable (select) that option and restart Audacity.
If that is not the problem, check the installation instructions for Audacity and reinstall. (Audacity will not run properly directly from the mounted DMG, it needs to be properly installed).
http://audacityteam.org/download/mac
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)
Re: no plug-ins in menus
OK, just deleted the older version of Audacity, and installed newer version 2.0.1 as instructed, Message pops up on opening "critical Nyquist files cannot be found. Nyquist applications will not work". Any ideas?
-
Gale Andrews
- Quality Assurance
- Posts: 41761
- Joined: Fri Jul 27, 2007 12:02 am
- Operating System: Windows 10
Re: no plug-ins in menus
Someone else reported this in 2.0.1 on Mac a few days ago, but I never heard back from him after replying.micksan wrote:OK, just deleted the older version of Audacity, and installed newer version 2.0.1 as instructed, Message pops up on opening "critical Nyquist files cannot be found. Nyquist applications will not work". Any ideas?
The message "Critical Nyquist files could not be found. Nyquist effects will not work" will appear if Audacity cannot find the "nyquist" folder inside the same folder Audacity.app is located in. This could happen if you deleted or renamed the nyquist folder, or did not mount, unzip or install Audacity correctly. This should therefore have been corrected if you reinstalled Audacity correctly from the .dmg.
Open Finder then choose "Applications" on the left. Click the triangle next to the Audacity installation folder, so that
Finder displays all the files and folders inside the Audacity folder. Do you see a "nyquist" folder? Does it contain a "rawwaves" folder and a lot of .lsp files? That is what you need.
If that does not help, are you running a case-sensitive version of OS X (that means, it treats lower and upper case file and folder names as different)? You can probably find this information at Go > Utilities > Disk Utility. If your system is not case-sensitive, then while in Disk Utility, select your system drive and Verify Disk and then when that's done, Repair Permissions.
Gale
________________________________________FOR INSTANT HELP: (Click on Link below)
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual
Re: no plug-ins in menus
Have repaired permissions, but still no Nyquist files when I open Audacity. Shall I uninstall and reinstall the program again now?
-
Gale Andrews
- Quality Assurance
- Posts: 41761
- Joined: Fri Jul 27, 2007 12:02 am
- Operating System: Windows 10
Re: no plug-ins in menus
There is probably no point unless you did not install Audacity correctly before.micksan wrote:Have repaired permissions, but still no Nyquist files when I open Audacity. Shall I uninstall and reinstall the program again now?
Can I ask my questions again?
Open Finder then choose "Applications" on the left. Click the triangle next to the Audacity installation folder, so that
Finder displays all the files and folders inside the Audacity folder. Do you see a "nyquist" folder? Does it contain a "rawwaves" folder and a lot of .lsp files? That is what you need.
If that does not help, are you running a case-sensitive version of OS X (that means, it treats lower and upper case file and folder names as different)? To test that out, try renaming the "nyquist" folder I mentioned above to "Nyquist" (right-click over the folder > Get Info). Do you get the same error when you launch Audacity now?
Gale
________________________________________FOR INSTANT HELP: (Click on Link below)
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual
Re: no plug-ins in menus
Sorry, drafted a reply then returned later and only answered the 2nd part of your question.. Yes, I have the various nyquist.lsp files and the .raw files. Don't know if the Mac is case-sensitive or not, but changed the folder name to Nyquist, opened Audacity and the same message appears (that it cannot find the Nyquist files).
I have reverted to just separating tracks manually once the whole cassette has been imported. Please advise if the group and album name can easily be set to repeat when completing track file details. The save and default features don't seem to work for me.
I have reverted to just separating tracks manually once the whole cassette has been imported. Please advise if the group and album name can easily be set to repeat when completing track file details. The save and default features don't seem to work for me.