Recording error message code 9986

Help for Audacity on macOS.
Forum rules
ImageThis forum is for Audacity on macOS 10.4 and later.
Please state which version of macOS you are using,
and the exact three-section version number of Audacity from "Audacity menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
dmorga
Posts: 4
Joined: Fri Aug 05, 2016 12:30 am
Operating System: macOS 10.12 Sierra

Recording error message code 9986

Post by dmorga » Sun Aug 09, 2020 11:38 pm

Audacity version 2.4.2
Mac OS Catalina ver. 10.15.6
Mac Mini 2018
Screen Shot 2020-08-09 at 4.34.19 PM.png
error message
Screen Shot 2020-08-09 at 4.34.19 PM.png (166.52 KiB) Viewed 312 times
Screen Shot 2020-08-09 at 4.19.47 PM.png
system setup
Screen Shot 2020-08-09 at 4.19.47 PM.png (593.98 KiB) Viewed 312 times
Operation is random. Getting recording error message. See attachments pls

thx!

billw58
Forum Staff
Posts: 5566
Joined: Wed Aug 12, 2009 2:10 am
Operating System: macOS 10.15 Catalina or later

Re: Recording error message code 9986

Post by billw58 » Mon Aug 10, 2020 3:41 pm

What are you trying to do?
-- Bill

dmorga
Posts: 4
Joined: Fri Aug 05, 2016 12:30 am
Operating System: macOS 10.12 Sierra

Re: Recording error message code 9986

Post by dmorga » Mon Aug 10, 2020 6:33 pm

Use Soundflower (or Blackhole) to route audio from Spotify, iTunes or other source into Audacity for recording.

billw58
Forum Staff
Posts: 5566
Joined: Wed Aug 12, 2009 2:10 am
Operating System: macOS 10.15 Catalina or later

Re: Recording error message code 9986

Post by billw58 » Mon Aug 10, 2020 7:53 pm

I have no experience with Blackhole. There is this page on the wiki about using Soundflower.

-- Bill

billw58
Forum Staff
Posts: 5566
Joined: Wed Aug 12, 2009 2:10 am
Operating System: macOS 10.15 Catalina or later

Re: Recording error message code 9986

Post by billw58 » Tue Aug 11, 2020 8:41 pm

OK, so I tried out Blackhole on my Catalina Macbook Air.

Following the instructions here, I set up a simple Multi-output Device in Audio MIDI Setup consisting solely of Built-in Output and Blackhole. Then set Blackhole as the System Sound Output. Finally I set Blackhole as the Input Device in Audacity.

I got some glitches the first time I tried it. First the recording cursor wouldn't move. Then I got the portaudio error message. I was possible not being rigorous enough - I had Audacity open while I was installing Blackhole and setting up the multi-output device.

I did Transport > Rescan Audio Devices and that seemed to clear it up.

So my suggestion (based on my limited experience) is that your multi-output device may be too complex. Change it to what they suggest and try again. That should be all you need to record system audio.

-- Bill

dmorga
Posts: 4
Joined: Fri Aug 05, 2016 12:30 am
Operating System: macOS 10.12 Sierra

Re: Recording error message code 9986

Post by dmorga » Wed Aug 12, 2020 8:33 pm

Thx for the help.

steve
Site Admin
Posts: 80752
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu

Re: Recording error message code 9986

Post by steve » Wed Aug 12, 2020 9:33 pm

Is the problem resolved?
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

dmorga
Posts: 4
Joined: Fri Aug 05, 2016 12:30 am
Operating System: macOS 10.12 Sierra

Re: Recording error message code 9986

Post by dmorga » Thu Aug 13, 2020 3:48 am

Black Hole kept coming up randomly with the error message in my post. I went back to Soundflower as they are now posting compatibility with catalina.

So far, so good. I regret updating from Mojave. This is all a major pain in the ass.. thank you Apple

Post Reply