Audacity won't play or record

Help for Audacity on macOS.
Forum rules
ImageThis forum is for Audacity on macOS 10.4 and later.
Please state which version of macOS you are using,
and the exact three-section version number of Audacity from "Audacity menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
mac_audio
Posts: 122
Joined: Sun Aug 19, 2018 1:28 am
Operating System: macOS 10.15 Catalina or later

Audacity won't play or record

Post by mac_audio » Sat Sep 15, 2018 6:29 pm

I am learning to do voiceovers and also learning new gear.

I have an Onyx Blackjack audio interface, and when i change mics or cables, I usually just unplug the audio interface since it doesn't have an on/off switch, and I don't want to damage my mic with a sudden power surge.

Just now I recorded on track in Audacity, but haven't saved it yet. I unplugged my Onyx, changed mic cables, plugged back in the Onyx, and when I hit Record I get an error pop-up:

Code: Select all

Error opening sound device.
Try changing the audio host, recording device and the project sample rate.
Why am I getting this error?

I have macOS Sierra and Audacity v2.2.2

Never had this issue on my old Mac and with older version of Audacity.

If I quit out of Auacity and come back in, the problem disappears, but what is annoying is that often I have unsaved work that I do NOT want to save while I am swapping out mics and cables, and so to resolve this it forces me to save any scratch work which is a pain!

kozikowski
Forum Staff
Posts: 68902
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: Audacity won't play or record

Post by kozikowski » Sat Sep 15, 2018 9:22 pm

Changing cables in the middle of a production or recording is insanely dangerous. You should only hot-swap cables when the production isn't that important.

If Audacity does survive the changeover, Transport > Rescan...

Koz

mac_audio
Posts: 122
Joined: Sun Aug 19, 2018 1:28 am
Operating System: macOS 10.15 Catalina or later

Re: Audacity won't play or record

Post by mac_audio » Sat Sep 15, 2018 9:44 pm

kozikowski wrote:
Sat Sep 15, 2018 9:22 pm
Changing cables in the middle of a production or recording is insanely dangerous. You should only hot-swap cables when the production isn't that important.
Why is it "insanely dangerous"?

And what do you mean by "hot-swap"? (I had "Take 1" recorded, but not saved, unplugged my audio interface, plugged in a new cable/mic, plugged back in my audio interface, and went to Audacity > File > New to do "Take 2" when I get the error mentioend above.)

I didn't save "Take 1" - and would prefer not to - because maybe "Take 2" is superior and I will save "Take 2" really as filename ""Take 1". (I'm just experimenting and getting comfortable with Audacity and my gear...)

kozikowski wrote:
Sat Sep 15, 2018 9:22 pm
If Audacity does survive the changeover, Transport > Rescan...

Koz
What does that do?

And why is this error appearing in the first place?

waxcylinder
Forum Staff
Posts: 14581
Joined: Tue Jul 31, 2007 11:03 am
Operating System: Windows 10

Re: Audacity won't play or record

Post by waxcylinder » Sun Sep 16, 2018 9:09 am

mac_audio wrote:
Sat Sep 15, 2018 9:44 pm
And why is this error appearing in the first place?
See this page in the Audacity Manual: https://manual.audacityteam.org/man/err ... evice.html

WC
________________________________________FOR INSTANT HELP: (Click on Link below)
* * * * * FAQ * * * * * Tutorials * * * * * Audacity Manual * * * * *

Post Reply