Question about making mono from stereo

Help for Audacity 2.x.x on Windows.
Forum rules
ImageThis forum is for Audacity 2.x.x on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
pdun459
Posts: 95
Joined: Mon Oct 08, 2012 8:25 pm
Operating System: Please select

Question about making mono from stereo

Post by pdun459 » Wed Jan 03, 2018 5:14 pm

I can see two ways of making a mono track from stereo:

1. Menu Bar>Tracks>Stereo Track to Mono
or
2. Track Control Panel>Dropdown Menu>Split Stereo to Mono. Then export one of the two mono tracks.

I was wondering if method one has any advantages over two? Two is a lot faster, just wondering if quality should be about the same. It's an ebook mp3, mostly voice.

steve
Site Admin
Posts: 47319
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu
Contact:

Re: Question about making mono from stereo

Post by steve » Wed Jan 03, 2018 5:50 pm

pdun459 wrote:1. Menu Bar>Tracks>Stereo Track to Mono
This "mixes" the left and the right channels to create a single mono track. This is most useful when the stereo track has very different left / right channels and you want both sides in the mono version.
pdun459 wrote:2. Track Control Panel>Dropdown Menu>Split Stereo to Mono. Then export one of the two mono tracks.
This literally splits the stereo track so that the upper (left) channel of the stereo track becomes one mono track, and the lower (right) channel becomes another mono track.
This is particularly useful if you have a stereo recording with one good channel and one bad channel. You would (of course) discard the bad channel. It is also useful when the two channels in the stereo track are the same, or very nearly the same, because it is so much quicker than mixing down to mono.
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

pdun459
Posts: 95
Joined: Mon Oct 08, 2012 8:25 pm
Operating System: Please select

Re: Question about making mono from stereo

Post by pdun459 » Wed Jan 03, 2018 7:04 pm

Thanks for that very good explanation. Is there a way to analyze each track to see how similar they are? The look the same and basically sound the same. It's an ebook so I assume they're basically the same, but I'd be curious analyze them in a more precise way. Thanks.

steve
Site Admin
Posts: 47319
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux *buntu
Contact:

Re: Question about making mono from stereo

Post by steve » Wed Jan 03, 2018 10:42 pm

pdun459 wrote:I'd be curious analyze them in a more precise way.
A fairly quick and easy way:
1) Select the track.
2) Apply the "Vocal Remover" effect with default settings (as shown here: http://manual.audacityteam.org/man/vocal_remover.html)
Whatever is left, is the mathematical difference between the two tracks.

A more precise (but much slower) way is to use the "Analyze" option in the "Vocal Reduction and Isolation" effect: http://manual.audacityteam.org/man/voca ... ation.html
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)

pdun459
Posts: 95
Joined: Mon Oct 08, 2012 8:25 pm
Operating System: Please select

Re: Question about making mono from stereo

Post by pdun459 » Thu Jan 04, 2018 3:07 pm

That's excellent. The files I've tested so far are virtually the same on both tracks. Thank you very much, Audacity's awesome.

Post Reply