Is it possible to reduce frequency zone in spectrum i.e. amplitude vs frequancy. For exemple, reduce to 8000Hz?
Thnaks
Analysis, spectrum
Forum rules
Merci de noter que la plupart des membres de l'assistance d'Audacity ne parlent qu'anglais. Par conséquent, nous ne pouvons garantir une réponse aux questions en français.
Si vous n'avez pas reçu de réponse et que vous pouvez parler anglais, merci de vous adresser au Forum anglais dans la section appropriée à votre système d'exploitation et à votre version d'Audacity.
Merci de noter que la plupart des membres de l'assistance d'Audacity ne parlent qu'anglais. Par conséquent, nous ne pouvons garantir une réponse aux questions en français.Si vous n'avez pas reçu de réponse et que vous pouvez parler anglais, merci de vous adresser au Forum anglais dans la section appropriée à votre système d'exploitation et à votre version d'Audacity.
-
claude.legros
- Posts: 1
- Joined: Thu Oct 06, 2011 12:46 pm
- Operating System: Please select
-
kozikowski
- Forum Staff
- Posts: 68941
- Joined: Thu Aug 02, 2007 5:57 pm
- Operating System: macOS 10.13 High Sierra
Re: Analysis, spectrum
Analyze > Plot Spectrum will always expand to display everything it thinks in in your show -- or your selection.
You can restrict the show by applying filters.
Effects > Low Pass Filter > 8000
That will make a new show that gracefully dies around 8000 Hz. If you analyze the new show, the display should show significant dip or rolloff around there. It will not do a "brick wall" drop. You can force tools to do that, but the music may be damaged.
Koz
You can restrict the show by applying filters.
Effects > Low Pass Filter > 8000
That will make a new show that gracefully dies around 8000 Hz. If you analyze the new show, the display should show significant dip or rolloff around there. It will not do a "brick wall" drop. You can force tools to do that, but the music may be damaged.
Koz