Ezcap USB Cassette Capture & MacBook Pro 2011

Help for Audacity on macOS.
Forum rules
ImageThis forum is for Audacity on macOS 10.4 and later.
Please state which version of macOS you are using,
and the exact three-section version number of Audacity from "Audacity menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
shaunfenn
Posts: 4
Joined: Wed Sep 18, 2013 9:15 pm
Operating System: Please select

Ezcap USB Cassette Capture & MacBook Pro 2011

Post by shaunfenn » Wed Sep 18, 2013 9:40 pm

Hi,

I have recently bought the Ezcap USB cassette capture, found the driver on the site and installed it, then switched the input to USB PnP Audio Device. But when I try and record a cassette onto the computer an error comes back saying "Error while opening sound device. Please check the input device settings and the project sample rate". As far as I'm aware, the input device settings involve pressing play on the cassette player!!

What am I doing wrong here??? It's not registering the PnP on my computer, the USB doesn't show on the desktop, is it even supposed to??

Very confused as to how this actually works.

Thanks in advance

Shaun

kozikowski
Forum Staff
Posts: 68942
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: Ezcap USB Cassette Capture & MacBook Pro 2011

Post by kozikowski » Thu Sep 19, 2013 1:36 am

Audacity > Preferences > Quality: 44100, 16-bit.
Audacity > Preferences > Devices > Stereo.

Some devices will put up with other settings and some won't.

Koz

shaunfenn
Posts: 4
Joined: Wed Sep 18, 2013 9:15 pm
Operating System: Please select

Re: Ezcap USB Cassette Capture & MacBook Pro 2011

Post by shaunfenn » Thu Sep 19, 2013 8:44 am

Hi there,

Didn't work, same error message.

Not sure what else to try.

I might try plugging a mini jack to mini jack from the player into the microphone input on my computer and change the input.

Would that work?

Thanks

Shaun

billw58
Forum Staff
Posts: 5566
Joined: Wed Aug 12, 2009 2:10 am
Operating System: macOS 10.15 Catalina or later

Re: Ezcap USB Cassette Capture & MacBook Pro 2011

Post by billw58 » Thu Sep 19, 2013 6:49 pm

shaunfenn wrote: I might try plugging a mini jack to mini jack from the player into the microphone input on my computer and change the input.
No, that won't work - you'll overload the mic input and get horrible distortion.
Does the info on this page help? http://wiki.audacityteam.org/wiki/User: ... ut_devices

-- Bill

Post Reply