How do i record with my microphone.

Help for Audacity on Windows.
Forum rules
ImageThis forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
beugling
Posts: 2
Joined: Tue Jul 05, 2016 2:00 am
Operating System: Windows 10

How do i record with my microphone.

Post by beugling » Tue Jul 05, 2016 2:03 am

I can't figure out how to get out of my computers built in microphone and onto the one I bought for recording. I'm trying to hook up a Shure SM57 through a Focusrite Scarlet 2i2 sound interface to my Toshiba laptop.

kozikowski
Forum Staff
Posts: 69384
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: How do i record with my microphone.

Post by kozikowski » Tue Jul 05, 2016 5:10 am

There may be some interaction problem with the Scarlett and Win10. We need to wait for a Windows elf for that.

I think the order is important.

Plug the Scarlett USB in and make sure the little green USB light comes on.

Switch 48V off if it isn't already.

Plug the microphone in channel 1. It should be possible to turn the Mic-1 gain up, speak into the microphone and get the green knob surround light to come on. It should be possible to yell with the control all the way up and get that light to turn red. That's an intentional overload condition just for testing. It doesn't harm anything and it's good to know the red light system works.

Start or Restart Audacity. It should be possible to find the microphone in the Audacity Device Toolbar.

http://manual.audacityteam.org/man/device_toolbar.html

I have no idea what it's going to say. The USB connection never says what you think it's going to. USB Audio CODEC?

Press record and you should get a stereo show (two blue waves) with your voice on the top wave and nothing on the bottom.

Where do you lose it?

Koz

kozikowski
Forum Staff
Posts: 69384
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: How do i record with my microphone.

Post by kozikowski » Tue Jul 05, 2016 5:15 am

Please note that the 2i2 is a forced stereo device. I don't think it will connect in mono (consult your instructions). So as far as I know, you can't record a mono production such as an audiobook or guitar solo directly.

It's not hard to get there. Use the drop-down menu to the left and Split Stereo to Mono. Delete the silent track.

This also makes it difficult to overdub/sound-on-sound because you're always playing to Left of a stereo show.

Again, consult your instructions. I do not own a 2i2.

Koz

kozikowski
Forum Staff
Posts: 69384
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: How do i record with my microphone.

Post by kozikowski » Tue Jul 05, 2016 5:21 am

I see from the 2i2 manual they supply a software package. I don't know what the interaction between the software drivers and Audacity is. Time for the Windows elves [backing away carefully].

Koz

Gale Andrews
Quality Assurance
Posts: 41761
Joined: Fri Jul 27, 2007 12:02 am
Operating System: Windows 10

Re: How do i record with my microphone.

Post by Gale Andrews » Tue Jul 05, 2016 12:54 pm

To answer Koz's question, the 2i2 requires the release driver 2.5.1 on Windows 10.

Gale
________________________________________FOR INSTANT HELP: (Click on Link below)
* * * * * Tips * * * * * Tutorials * * * * * Quick Start Guide * * * * * Audacity Manual

Post Reply