muting one channel on stereo track during edit

maford · Post by **maford** » Tue Jun 09, 2015 10:59 pm

While recording (in stereo mode) a piano piece, my Zoom recorder was pointing the wrong direction, reversing the L and R channels. Hence the L (base) is too loud, over-powering the R (treble). I cannot "blue in" just the R to increase its volume. Both L and R get blued in. Is there a work-around? (It's a nice recording, and I don't want to convert it to Mono.) Help would be appreciated! I have the latest Audacity 2.1.0 and am exiting on a Dell laptop with Windows XP.

Post by **kozikowski** » Wed Jun 10, 2015 1:54 am

Use the little black down-arrow to the left of the track. > Swap Stereo Channels.

Koz

maford · Post by **maford** » Wed Jun 10, 2015 5:04 am

Thanks so much. That little black arrow did the job!

Post by **Gale Andrews** » Wed Jun 10, 2015 2:38 pm

Please have a look at Important information for Windows XP users if you have not already done so.

Gale

Audacity Forum

muting one channel on stereo track during edit

muting one channel on stereo track during edit

Re: muting one channel on stereo track during edit

Re: muting one channel on stereo track during edit

Re: muting one channel on stereo track during edit