Stereo Mix recording low quality

Help for Audacity on Windows.
Forum rules
ImageThis forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Post Reply
cr0ista
Posts: 4
Joined: Wed Jul 18, 2012 11:30 pm
Operating System: Please select

Stereo Mix recording low quality

Post by cr0ista » Wed Jul 18, 2012 11:44 pm

Audacity version 2.0.1
Windows 7 Professional 32-bit
Sound Card: SoundMAX Integrated Digital HD Audio

When I try to record using the Stereo Mix, there is a very low rumbling sound that occurs. This occurs even if I take the input volume way down. I can get rid of the rumbling using a High Pass filter or using the '100 Hz Rumble' equalization, but even still the quality of the recording is noticeably lower than the original. My sound card drivers are the latest, and I tried playing with the sampling rate setting on my sound card to no avail. Is it typical for Stereo Mix to lose significant quality or is there something I might be doing wrong, or could it be that my particular sound card happens to be of low quality?

kozikowski
Forum Staff
Posts: 69384
Joined: Thu Aug 02, 2007 5:57 pm
Operating System: macOS 10.13 High Sierra

Re: Stereo Mix recording low quality

Post by kozikowski » Wed Jul 18, 2012 11:51 pm

Stereo-Mix should be a digital carbon copy of the show, unless you're going all the way out to analog and back. Are you sure you're not recording the laptop microphone and the rumble is the laptop fan? That would reduce the quality of the show significantly.

http://manual.audacityteam.org/help/man ... puter.html

Koz

cr0ista
Posts: 4
Joined: Wed Jul 18, 2012 11:30 pm
Operating System: Please select

Re: Stereo Mix recording low quality

Post by cr0ista » Thu Jul 19, 2012 12:04 am

No; in Audacity it says "Stereo Mix" as the Input Device, and I even have my microphone disabled. I agree that it should theoretically be the same data that gets sent to your speakers if it is working correctly, which is why I'm baffled by my results.

Post Reply