I have a Dell Inspiron running Windows 10.
I am trying to record a stereo signal out of a Behringer QX1002USB mixer into Audacity (3.0.2) using the USB connection. I have a stereo signal at the mixer, but when recording, Audacity seems to 'double' the left hand channel to create the stereo recording. The right channel from the mix is lost.
I have also tried going from RCA line outs of the mixer through a Behringer UCA222 interface. There is a stereo signal at the interface, but again Audacity records a 'double' of the left-hand channel only. The right channel is lost.
I have also tried taking a stereo signal via RCA from a tape deck through the UCA222 interface. Same thing happens. Stereo signal at the interface but Audacity record a 'double' of the left-hand channel only.
I have tried combinations of MME, Windows DIRECT SOUND and Windows WASAPI with all devices in the drop-down but have the same issue.
Is this a driver issue?
Any suggestions gratefully received.
Thank you
Kevin Demmon
Records half of stereo signal
Forum rules
This forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
This forum is for Audacity on Windows.Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Re: Records half of stereo signal
Make sure Windows is set-up for stereo. There is some information here.
Re: Records half of stereo signal
See ... https://youtu.be/59QY0WL3f64?t=17Pastiche wrote: ↑Sat May 08, 2021 11:25 amI am trying to record a stereo signal out of a Behringer QX1002USB mixer into Audacity (3.0.2) using the USB connection. I have a stereo signal at the mixer, but when recording, Audacity seems to 'double' the left hand channel to create the stereo recording. The right channel from the mix is lost ...