Hey! I recently got a new microphone and audio interface and I’ve tried setting it up with audacity, but to no luck... I’ve been encountering this error for a couple of hours now, I have tried some other ‘fixes’ but unfortunately none of them worked for my situation.
I am using a Rode AI-1 interface with the Rode A-1 microphone. My computer recognizes the microphone and so does Audacity: I can record a single track, but whenever I hit shift+R the “Error opening recoding device” error pops up...
Any help/tips? Thank you for your time!
~LTB
Error loading recording device.
Forum rules
This forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
-
LickTheBishop
- Posts: 1
- Joined: Tue Dec 22, 2020 7:20 pm
- Operating System: Windows 10
Re: Error loading recording device.
A couple of things to try:LickTheBishop wrote: ↑Tue Dec 22, 2020 7:25 pmbut whenever I hit shift+R the “Error opening recoding device” error pops up...
- 1. Are you using Audacity 2.4.2 ?
- 2. Try just using "R".
- 3. Check that all of your sample rates match. In Audacity (lower left corner). In Windows: right-click speaker icon in taskbar in lower right-hand corner > Sounds > Recording Tab > (click your device) > Properties > Advanced > Default Format.
- 4. Try different hosts: MME, Windows DirectSound, WASAPI
- 5. Check that your firmware is up-to-date: https://www.rode.com/interfaces/ai1