we installed Audacity 2.3.0 on the work computer, Windows7
we use a Tascam 144 MK II USB interface
Audacity has the Tascam selected as the input device
there is no signal on the meters, it records but there is no waveform, no signal
we have Sound Forge 9, it sees the interface and it works fine. Why doesnt Audacity get signal from the interface.
cant record
Forum rules
This forum is for Audacity on Windows.
Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
This forum is for Audacity on Windows.Please state which version of Windows you are using,
and the exact three-section version number of Audacity from "Help menu > About Audacity".
Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.
Re: cant record
I assume you mean as the Recording Device?Audacity has the Tascam selected as the input device
...If windows sees it, Audacity should see it and it should work.
Are you sure Sound Forge is working right now, or did it work in the past? Were you using Windows drivers or ASIO drivers? ...If Audacity "sees it" the Windows drivers are (probably) working.
-
Lissandragaren3
- Posts: 4
- Joined: Sat Dec 22, 2018 3:28 am
- Operating System: Windows 10
Re: cant record
Did you install all of drivers for your device?
I think you miss some audio driver!!!
Check it again by: This PC-right click,manage-Device Manager.
I think you miss some audio driver!!!
Check it again by: This PC-right click,manage-Device Manager.