Page 1 of 2

Setting M-Audio Mobile Pre as audio input

Posted: Mon Jun 28, 2010 10:00 pm
by wgdefoore
Hello

I have an M-Audio Mobile Pre and a Shure Microphone setup, and would like to record from that source. The equipment is plugged in and working, but my Preferences does not give me that option as a recording device. I can record just fine from my internal mic on my computer, so there's no problem there.

Any suggestions?

Thanks,

William

Re: Setting M-Audio Mobile Pre as audio input

Posted: Mon Jun 28, 2010 10:08 pm
by whomper
check the tutorial/tips here for how to connect a usb device
but
if it uses asio it wont work with audacity.

why not use the software that came with the mthing to record
and use audacity to edit?

Re: Setting M-Audio Mobile Pre as audio input

Posted: Mon Jun 28, 2010 10:46 pm
by wgdefoore
I looked in tutorials/tips and did not find anything about connecting a usb device. I know that this system works, by the way, because I used it on my previous computer. My new computer uses Windows 7, if that makes any difference. I just need to find a way for Audacity to detect the external usb mic device so that I can utilize it.

Re: Setting M-Audio Mobile Pre as audio input

Posted: Mon Jun 28, 2010 10:52 pm
by steve
There's a page here about USB Turntables. Much of the information on this page also applies to recording with external USB sound cards. http://wiki.audacityteam.org/wiki/USB_turntables

Re: Setting M-Audio Mobile Pre as audio input

Posted: Tue Jun 29, 2010 1:05 am
by whomper
time to rename that page usb devices
and make TTs a section
plus add a few words about mikes, interfaces, etc.

Re: Setting M-Audio Mobile Pre as audio input

Posted: Tue Jun 29, 2010 12:11 pm
by wgdefoore
Thanks guys...

Still having problems getting Audacity to recognize the usb input. I followed all of the instructions and troubleshooting tips, and for some reason, it still does not recognize the usb input as a recording option.

I checked, and the Mobile Pre amp is working fine, current drivers, etc. I disabled the internal mic on the computer, all to no avail.

I still have my old computer (with Windows XP), and as a last resort could use it for recording. Eventually, however, I need to record on the new computer.

Any more suggestions?

Re: Setting M-Audio Mobile Pre as audio input

Posted: Tue Jun 29, 2010 1:31 pm
by whomper
many places diddle the audio

do you have the latest drivers ?

check the drivers settings
check the opsys settings
check audacity settings last

Re: Setting M-Audio Mobile Pre as audio input

Posted: Tue Jun 29, 2010 4:30 pm
by steve
wgdefoore wrote:Still having problems getting Audacity to recognize the usb input
1) Plug in the USB interface and reboot the computer.
2) click "Start > Control Panel > Hardware and Sound > Sound" (if you're using "Classic View" there's a direct link to "Sound" in the Control Panel), then click on the "Recording" tab.
3) Check that the USB device is enabled as a Recording device as indicated here (scroll down to the picture below the blue text box) http://wiki.audacityteam.org/wiki/Mixer ... trol_Panel

Re: Setting M-Audio Mobile Pre as audio input

Posted: Wed Jun 30, 2010 12:26 pm
by wgdefoore
Success! Got it working. Thanks a lot for your help and your patience in working through this with me.

Re: Setting M-Audio Mobile Pre as audio input

Posted: Wed Jun 30, 2010 3:34 pm
by whomper
great
now tell us what worked for your problem
others may have it too and would like to know the trick