# Can't Record from Cassette Tape

**URL:** <https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771>\
**Category:** Windows\
**Created:** [June 28, 2016, 5:45pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771 "2016-06-28T17:45:11Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![AudaciousEddie](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/a/65b543/32.png) [@AudaciousEddie](https://forum.audacityteam.org/u/AudaciousEddie)\
**Post date:** [June 28, 2016, 5:45pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/1 "2016-06-28T17:45:11Z")

</div>

Hello,

I’m using Audacity 2.2.1 with Windows 10. I’m starting to digitise my varied collection of vinyl, tape, etc. I have Teac 300 separates, and I’m connecting via a USB digitiser.

All my separates (CD, tape, record deck, minidisc) have line connections to the Teac amp/receiver. I have had good results so far recording from vinyl and radio. But when I try from my tape player it dosn’t work. I can hear the sound from the amp speakers, and its’ OK, but I don’t get a proper signal appearing in Audacity: There’s just a low level noise coming in, at a pretty constant level, and I wondered if anyone else had experienced this.

I have tried both pre-recorded tapes and those I recorded myself. I also bypassed the USB box and run the amp line output into the computer (via a mic usb adapter as my direct mic input is faulty).

I can’t understand what’s going on as the set up is the same whether its record deck or tape player, apart from a different line input to the amp. Not really an Audacity issue I suppose, but I could do with some expert input.

---

<div class="post-metadata">

**Author:** ![kozikowski](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/k/919ad9/32.png) [@kozikowski](https://forum.audacityteam.org/u/kozikowski)\
**Post date:** [June 28, 2016, 6:53pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/2 "2016-06-28T18:53:22Z")

</div>

> I’m using Audacity 2.2.1 with Windows 10.

I hope not. The current issue of Audacity is 2.1.2.

> via a mic usb adapter as my direct mic input is faulty

Neither one should work. Computer Mic-In is expecting an actual computer microphone such as this.

![](https://forum.audacityteam.org/uploads/default/original/3X/a/0/a05fc3a18fbc8761f8b00411ae698579625a0e18.jpeg)

Most Mic-In connections aren’t stereo and most of them will overload when you try to apply a high-volume stereo connection.

> Not really an Audacity issue I suppose

No, it’s not. If none of them worked, then you might have a case for an Audacity failure. There’s something about the switching in your music system that isn’t allowing your tape music to go through.

I make very good use of a simple Behringer UCA-202 Stereo USB adapter.

![](https://forum.audacityteam.org/uploads/default/original/3X/1/a/1a39eb6c8db72c4d0476bdc01e8646dd5418525a.jpeg)

It will accept any stereo connection for conversion to USB form. It doesn’t have any volume controls, so you could get into trouble with a really hot tape or other media. We posted our experiences with other devices.

> [@Sound Card Reviews](https://forum.audacityteam.org/t/sound-card-reviews/8375/1):
>
> This topic concerns mono/stereo sound cards and recording devices. Multi-channel recording devices are listed here: [http://forum.audacityteam.org/viewtopic.php?f=27&t=38626](http://forum.audacityteam.org/viewtopic.php?f=27&t=38626) How well does your sound card work with Audacity? Audacity will work with the vast majority of sound cards, however some sound cards are known to have issues, while others are known to work flawlessly. Given that many Audacity users will at some point want to replace/upgrade their sound card, and the huge range of products …

Koz

---

<div class="post-metadata">

**Author:** ![DVDdoug](https://forum.audacityteam.org/user_avatar/forum.audacityteam.org/dvddoug/32/32925_2.png) [@DVDdoug](https://forum.audacityteam.org/u/DVDdoug)\
**Post date:** [June 28, 2016, 7:09pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/3 "2016-06-28T19:09:03Z")

</div>

> I’m connecting via a USB digitiser.

Connected to what on the analog side of your “digitizer”?

> All my separates (CD, tape, record deck, minidisc) have line connections to the Teac amp/receiver. I have had good results so far recording from vinyl and radio. But when I try from my tape player it dosn’t work.

If you are recording from Tape-Out with the tape player connected to Tape-In, that might not work because it would create a feedback loop if you were recording with the tape recorder… So, **try plugging the tape player into a different Aux/Line line input, such as where your CD player is normally connected, etc.**

---

<div class="post-metadata">

**Author:** ![Elayne](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/e/ec9cab/32.png) [@Elayne](https://forum.audacityteam.org/u/Elayne)\
**Post date:** [June 28, 2016, 8:11pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/4 "2016-06-28T20:11:57Z")

</div>

My challenge is more basic now and really doesn’t have to do with the tape (I don’t think).

I was recording when I hit a key to pause the recording. Instead of pausing the last sound kept playing even though I then turned the player off.

Now when I try to record the cursor remains at 0 or the place i put it. It will not move. And I now get Latency errors.

I removed Audacity 2.1.0 and reinstalled it; no luck.

I just Uninstalled it and installed 2.1.2; same challenge. I had even deleted the directory.

However no matter what I do it still seems to remember my settings since I changed Latency to 0 0 to see if that would work and after I installed 2.1.2 that was what shown instead of 100 -130.

Do you know ho I can record again?

Is there a way to either delete the settings or make them default settings again?

TIA  
Elayne

---

<div class="post-metadata">

**Author:** ![kozikowski](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/k/919ad9/32.png) [@kozikowski](https://forum.audacityteam.org/u/kozikowski)\
**Post date:** [June 28, 2016, 10:14pm UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/5 "2016-06-28T22:14:56Z")

</div>

Reinstalling Audacity doesn’t reset Audacity. Part way through the Audacity Windows install, it will ask you if you want to reset your preferences and settings. Say yes (if that’s what you want).

Koz

---

<div class="post-metadata">

**Author:** ![Elayne](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/e/ec9cab/32.png) [@Elayne](https://forum.audacityteam.org/u/Elayne)\
**Post date:** [June 29, 2016, 3:20am UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/6 "2016-06-29T03:20:57Z")

</div>

Thanks for that clue. I had chosen the zip file so there was no installation.

Your suggestion fixed the issue.

Thanks again

---

<div class="post-metadata">

**Author:** ![AudaciousEddie](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/a/65b543/32.png) [@AudaciousEddie](https://forum.audacityteam.org/u/AudaciousEddie)\
**Post date:** [June 29, 2016, 6:23am UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/7 "2016-06-29T06:23:03Z")

</div>

Thanks for the rapid replies on my original query.

I had better just clarify a few things first. I have Audacity 2.1.1.

My digitiser (which it is since it based around an A/D converter) or USB adaptor, is a Mixmeister. I only tried the mic USB adaptor (yes it is mono) to see if it would shed any light on the problem.

My record deck, cassette tape player/recorder, minidisc, CD, all have separate line connections into the amp. You then select by switch and get a single line out. You also get the speaker output. So you can see that if I select ‘vinyl’ and I hear the sound plus I get a good input into Audacity, and I then select tape and I don’t get a good input into Audacity, but can till hear via the speakers, something odd is happening with the tape input. It’s also OK by the way with input from the radio.

Regards,

Eddie

---

<div class="post-metadata">

**Author:** ![Gale\_Andrews](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/g/e0b2c6/32.png) [@Gale\_Andrews](https://forum.audacityteam.org/u/Gale_Andrews)\
**Post date:** [June 29, 2016, 10:59am UTC](https://forum.audacityteam.org/t/cant-record-from-cassette-tape/42771/8 "2016-06-29T10:59:20Z")

</div>

> [@Elayne](#):
>
> Thanks for that clue. I had chosen the zip file so there was no installation.
> 
> Your suggestion fixed the issue.

Thanks. If you have any more questions, please start a new topic of your own. This is less confusing both for us trying to answer two different people in the same topic, and for the original poster. Thanks again.  
  
  
Gale
