# Amplitude Modulation and Carrier Wave Addition

**URL:** <https://forum.audacityteam.org/t/amplitude-modulation-and-carrier-wave-addition/46968>\
**Category:** Audio Processing\
**Created:** [October 11, 2017, 1:09pm UTC](https://forum.audacityteam.org/t/amplitude-modulation-and-carrier-wave-addition/46968 "2017-10-11T13:09:34Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![steve](https://forum.audacityteam.org/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](https://forum.audacityteam.org/u/steve)\
**Post date:** [October 11, 2017, 1:22pm UTC](https://forum.audacityteam.org/t/amplitude-modulation-and-carrier-wave-addition/46968/2 "2017-10-11T13:22:30Z")

</div>

> [@Pythonimus](#):
>
> Some tutorials state you need to add 1 and multiply by 0.5 before applying AM.

([Amplitude modulation - Wikipedia](https://en.wikipedia.org/wiki/Amplitude_modulation))

 ![](https://forum.audacityteam.org/uploads/default/original/3X/2/1/21c498f02cca5eca453d3b87c835f442db43262e.png)

If you want 100% modulation, then the “message” needs to have a range of 0 to 1.

If this is about “Silent Subliminals”, then this topic may help: [Silent Subliminals [solved?]](https://forum.audacityteam.org/t/silent-subliminals-solved/20100/1)  
Also, note that sound cards are designed for humanly audible sound, so they are often limited to a maximum analog in / out frequency of not much more than 20 kHz (even if they support sample rates of 192 kHz or more).

---

_[View the full topic](https://forum.audacityteam.org/t/amplitude-modulation-and-carrier-wave-addition/46968)._
