Audacity Forum

I know this looks like a topic that has been visited before, but I have read the help and tips and nothing seems to work. I have a high-spec laptop running Windows 7 at 64 bit and everything else I have used on it runs perfectly. However, I have now got a Tevion ...

Thanks guys for all the help it turns out it is a earth problem, i recorded with out the mains cable in and the sound quality was brilliant, just need to buy a new batery now as the one in my laptop last about 5 mins LOL!!

Again thanks for all the help

Dan

... from when I pluck my bass & when I hear it via monitor input. Tried & tried to figure out how to work this out of it & can't. Any help would be appreciated!

Most laptops tend to have only a MIC input and not a Line-in input. A mic input is expecting a much lower sound level than line-level. So if you are feeding the signal into a mic input then that is likely to be the cause of your over-hot signal. If you do have only a mic in - then you are a candidat...

As Steve said above the Behringer device is a "no frills" unit and has no gain controls. Alll it is is a device to take in an analog audio signal and convert to a digital signal, delivering the output via USB. I use the Edirol UA-1EX (now superseded by the Cakewalk UA-1G - both devices mad...

... set in Audacity, the sound device and/or Windows is the same. See: http://wiki.audacityteam.org/wiki/Windows_7_OS#sample_rates If that does not help, investigate if you have correct drivers for the sound device you are using: http://wiki.audacityteam.org/wiki/Windows_7_OS#drivers Gale

I am giving up Thanks for trying to help

Hi All,

I would like to be able to listen to the play back, and adjust the EQ live, or on the fly.

Is this possible?

Thanks for your help.

Dan Andrews

You can start by applying the equalizer tool in the "telephone" setting: drop everything below 300 and above 3000. There may even be a pre-baked filter that does this.

Then apply Effect > Leveler about three times at maximum compression.

Koz

I just wanted to thank you for this post. I had the same problem and found this and wow, my problems solved!