Audacity Forum

What other usb interface is recommended besides the uca 202? All I want is to digitize my tapes. I use an Edirol UA-1EX - unfortunately these are largely unavailable as Roland has stopped manufacturing it - but I do note that there is one currently available on eBay with no bids and a starting pric...

When I converted my MiniDiscs I experienced this with a few of them - and bearing in mind that these were all home recordings made by I was surprised by the level differences and the clipping. The only solution I found was to record those particular MiniDiscs by taking the analog RCA out from the Mi...

I may be wrong, but I'm guessing that Bob has inadvertently pressed either the "Envelope" tool button or the "Multi-tool" button. If so try clicking on the "Cursor" tool button - the I-beam See this page in the Manual: http://manual.audacityteam.org/o/man/tools_toolbar....

What I would do would be to export the projects as .WAV files and load those onto a thumb drive or external USB disk.

WC

This page in the manual may be useful to you: http://manual.audacityteam.org/o/man/meter_toolbar.html

WC

What you could perhaps do is to import all tracks from one side of the album and position them end-to-end on the same Audacity track (use the Time Shift tool). Rather than doing that you may want to uses a (free) tool like CDex to rip the CD - it has a setting whereby you can rip the whole CD as on...

Why are you " recording from a CD " - the only reason for that is if the CD has DRM (Digital Rights Management) on it. Otherwise it is much better to just rip the tracks from the CD using ripping software like CDex or EAC - even iTunes can do this job for you. You rip the tracks (or the wh...

WASAPI loopback should be available in 2.0.4 - but you'd probably be better off anyway upgrading to the current release 2.0.5 which you can get from here: http://audacityteam.org/download/

WC

dizzy1234 wrote:Sorry - what I meant was instead of "Stop and Move Cursor (Shift+A)" just "move cursor" to wherever is playing at the time but without stopping

Yes, just click where you want the cursor to be

WC

If a Noise Profile exists, that Noise Profile will be used. If a Noise Profile does not exist: If the Chain is applied to files, the first file (all of it) is used to create the Noise Profile. If the Chain is applied to the current project, the current Selection is used to create the Noise Profile....