If that's completely off the rails, then you need to correct me by throwing lots of fine details and part numbers. Which Boundary mic, etc?
Koz
Search found 46624 matches
- Fri May 15, 2015 9:13 pm
- Forum: Recording Equipment
- Topic: Two sources
- Replies: 4
- Views: 837
- Fri May 15, 2015 9:11 pm
- Forum: Recording Equipment
- Topic: Two sources
- Replies: 4
- Views: 837
Re: Two sources
Not quite enough pieces. I assume streaming, not broadcasting, so that takes up the sound channels in the laptop. If the mixer has an Effects Send, you can use that to send Crowd Noise Clean or Announce Clean into a separate laptop or recorder. If it really is broadcast, then you'll have a terminal ...
- Fri May 15, 2015 8:27 pm
- Forum: Recording Techniques
- Topic: Finding the right equalization for my voice
- Replies: 31
- Views: 7654
Re: Finding the right equalization for my voice
It is cleaner. I'm going with my first comment. I would have no trouble listening to a story in that original voice. The reference you posted as an example has a more forward, sharper sound than you. I guess it helps that he's screaming into the microphone a lot of the time, but that's him. It's pos...
- Fri May 15, 2015 8:08 pm
- Forum: Windows
- Topic: What sound card do I need to record vinyl to laptop please?
- Replies: 28
- Views: 3863
Re: What sound card do I need to record vinyl to laptop plea
Probably not. We've had good luck with the Behringer UCA202 stereo to USB interface. This is it connected between my sound mixer and laptop. http://www.kozco.com/tech/audacity/pix/peaveyUCA202Lenovo-650.jpg They make a different device called the UFO-202. That one's designed to go between the physic...
- Fri May 15, 2015 8:03 pm
- Forum: macOS
- Topic: Recording went from normal to shuddering, skipping, overlap
- Replies: 2
- Views: 260
Re: Recording went from normal to shuddering, skipping, over
That would be no. Once the system does that, it starts making trash.Is there any way to salvage the 2 hours of recording that are affected?!
I think there's a fix for that in one of the future builds for Mac. I'm very fuzzy on the process. We need to wait for a senior elf.
Koz
- Fri May 15, 2015 7:56 pm
- Forum: Audio Processing
- Topic: Increase noise Help
- Replies: 1
- Views: 370
Re: Increase noise Help
That's a frequently asked question, usually by people trying to record the far side of a cellphone or the remote point in a Skype call. Can I assume the two people are not split Left and Right in a stereo show? Unfortunately, we don't have a frequent solution. Software doesn't know what words are. A...
- Fri May 15, 2015 7:50 pm
- Forum: Windows
- Topic: What bit rate do I use when exporting audio from a video
- Replies: 10
- Views: 1702
Re: What bit rate do I use when exporting audio from a video
If you want to manage videos that you personally shot , then the sampling rate is probably 48000 and not 44100. If you're getting the work from download, it's already been crushed and compressed and it doesn't make any difference what you do, except you shouldn't recompress it. Double compression is...
- Fri May 15, 2015 12:00 pm
- Forum: Windows
- Topic: High pitched background noise.
- Replies: 9
- Views: 1796
Re: High pitched background noise.
I do it with the mixer (powered from the wall) analog microphones and the interface inside my Mac. Generally, we like the UCA202 if you need an interface. It's quiet, bidirectional and it's certified for overdubbing because of its on-board headphone monitoring. That's the system doing a broadcast ra...
- Fri May 15, 2015 11:51 am
- Forum: Windows
- Topic: "show clipping" - confused over results
- Replies: 10
- Views: 2081
Re: "show clipping" - confused over results
Since you can't actually see over 0, a sound value of 0 may or may not be damage. But three successive values at 0 might be damage. The wave would have gone higher had it been allowed to. You descend into fancy English again. Music is unlikely to have three or more successive values at 0. The behavi...
- Fri May 15, 2015 5:13 am
- Forum: Windows
- Topic: creating 1 channel WAV
- Replies: 4
- Views: 1038
Re: creating 1 channel WAV
If you have several separate timelines, make sure the one you want says "Mono." Select it by clicking just above MUTE and File > Export Selected.
Koz
Koz