Audacity Forum

Sorrie, I got mixed up with my earlier post. The value should be 3kHz @0dBFS level...

Actually the left is level and the bottom is frequency. However Wavosaur doesn't provides any value on the X & Y axis. But, the value should be at 60Hz @-10dBFS & 7kHz @ -22dBFS. The Sample rate is at 44.1kHz and the Buffer size is 1024. I realised that if I increase the buffer size to 2048, I have ...

Hi, I did a simple 3KHz mono tone using audacity 1.26 for a duraion of 30sec, I export this as a WAV file (16bit PCM) using 44.1kHz sampling rate. When I playback this wav file using a audio analyzer "Wavosaur" I can see that this audio file is not table. See attached picture for more detail. Is thi...

Hi, Actually the defualt setting for the sample format was already set at 32 bits float. But you have given me a good ideal to investigate the dithering effect on the waveform. I look up at your website and understood that the shape provide a good listening quality but at the compensation of noise a...

Hi, I've made a audio track of 60Hz and another audio track at 7kHz. After which I used the mix and render function to mix the two audio signal together. I've got a nice spectrum display up to 13kHz, however if you see the attachement file, the noise level at the spectrum above 13khz is rather hight...