Search found 12 matches
- Sun Sep 01, 2013 7:05 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
As far as I know. Can you make it worse and does it ever change pitch? What happens if you don't run Serato and just make a straight recording from, say, the microphone? Post a sample of the sound here. http://forum.audacityteam.org/viewtopic.php?f=49&t=72887 You're using the UCA202 because you...
- Sun Sep 01, 2013 8:36 am
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
This is a screenshot of my settings in Audacity
http://i.imgur.com/Y6ogYzN.jpg
This is correct right ?
http://i.imgur.com/Y6ogYzN.jpg
This is correct right ?
- Sun Sep 01, 2013 8:27 am
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
I am using KRK Rokit 5's and they are connected to mixer XLR to jack My Roket5s have an XLR on the back. Is that what you're using? Standard XLR Male to XLR Female also known as a "mic cable." http://kozco.com/tech/audacity/pix/XLR-Cable.jpg That's too bad. That's pretty much what you're ...
- Sat Aug 31, 2013 11:01 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
Actually, it's the Master-2 Outputs. The mixer has two sets of outputs. The broadcast balanced (3-pin XLR) and the home music RCAs. Thank you for the complete information. This is where I would be dragging out test equipment which you can't do. Ummmmm. Wait. How are the speakers connected to the mi...
- Sat Aug 31, 2013 11:00 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
Actually, it's the Master-2 Outputs. The mixer has two sets of outputs. The broadcast balanced (3-pin XLR) and the home music RCAs. Thank you for the complete information. This is where I would be dragging out test equipment which you can't do. Ummmmm. Wait. How are the speakers connected to the mi...
- Sat Aug 31, 2013 9:01 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
That means the mixer feed to the UCA202 is whistling. Time to get specific. Which mixer? Where is the UCA202 feed coming from? Tape-Out? Can you get it from somewhere else, like temporarily jack into the mixer headphone feed? Koz Mixer is a Pioneer DJM250 http://www.google.co.uk/imgres?imgurl=http:...
- Sat Aug 31, 2013 8:24 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
The Line-Out and the Headphone Out have the same show. All Monitor does is provide a way of listening to Line-In and Line-Out at the same time as a mix. This would seem to be of limited usefulness, but it's required to do Overdubbing and Sound-On-Sound. http://manual.audacityteam.org/o/man/tutorial...
- Sat Aug 31, 2013 8:21 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
The Line-Out and the Headphone Out have the same show. All Monitor does is provide a way of listening to Line-In and Line-Out at the same time as a mix. This would seem to be of limited usefulness, but it's required to do Overdubbing and Sound-On-Sound. http://manual.audacityteam.org/o/man/tutorial...
- Sat Aug 31, 2013 5:27 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Re: Behringer UCA202
Does it still whistle if you listen to the iMac headphone out with the UCA202 disconnected? It's a home run between the UCA202 and the iMac, right? No hubs? Does it whistle if you switch the UCA202 to Monitor and listen at the headphone connection during the recording? Or stop playing for a second ...
- Sat Aug 31, 2013 12:31 pm
- Forum: macOS
- Topic: Behringer UCA202
- Replies: 16
- Views: 2620
Behringer UCA202
Hi I have just recorded a DJ mix using this interface with Audacity. I have RCA leads from my mixer to the Input L and R on the Behringer. Then this is connected to my iMac via USB. When listening back to the recording i get a faint high pitched whistle throughout ???????? Can anyone advise why ? Ar...