Audacity Forum

OK, so I took some more time to actually look into the problem a little deeper. My original recording sounds ok in Audacity. I then checked the recording that was exported to MP3 on the computer with WMP and it still didn't have the "noise". So I went to the site that the recordings are up...

I'm not using any kind of noise removal unless there is something turned on by default in Audacity. Upon finishing recording I save as an Audacity project and then immediately export to MP3 to upload to our podcast site. So, I know the MP3 could cause some noise but this seems excessive. It may not ...

I am getting an annoying background noise I would call digital artifacts. I'm not sure if this term is correct. Regardless, It is there and shouldn't be. I am using an analog Yamaha MG32 mixer run through a Scarlett 2i2 audio interface into a Sony Vaio laptop dual core with 4 GB ram running Windows ...

Yeah, thanks. I'm gonna start by replacing the cable and then will check back in when I get that done.

As for the power even if it goes down a different wire, I wouldn't get a lit up LED on the Tascam without power to show that I am receiving or sending a signal I don't believe.

I know for a fact that I am not losing power and it is not flickering because I've verified I was still receiving and sending signal through the Tascam at all times especially when this occurs. I've tried switching to a different USB socket on the laptop. I've also tried simply pushing in on the cab...

Forgot to mention I am using Windows 7 64-bit

Hi, new here and looking for help. I am using Audacity for a single person speaking recording on one track with stereo input. I am using a Yamaha MG32/14FX Mixing console. I route the signal out from the REC OUT RCA plugs into a Tascam US-122L. The signal then goes through the USB into my Sony VAIO ...