I'm running Windows XP SP3.
My Windows XP CD is an original Microsoft Windows XP CD. And there are no scratches on it...
The device is designed for Windows XP. So where is the problem? It's curious...
Search found 9 matches
- Thu Aug 28, 2008 9:57 am
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
- Wed Aug 27, 2008 8:01 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
The recorded sound sounds like the picture shows ;) clipped! Yes the device is class-compliant. I deinstalled the M-Audio drivers and tried the Windows drivers: Same problem ;) By the way: Under Linux everything workds fine (there I use Audacity too). So the device must be intact. My Computer: - PC ...
- Tue Aug 26, 2008 10:27 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
The windows Sound recorder works... but with the same problem ;) I used a driver from 2004 before. Recently it was the latest driver. On 22.08.2008 a new driver was released and I installed it but I haven't seen any effect to the problem... I haven't seen any improvement that comes with the new driv...
- Tue Aug 26, 2008 7:12 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
Hm, ok I tested what you have said...
This is the result:
The line is between 5 and 6.
Of what avail is it?
This is the result:
The line is between 5 and 6.
Of what avail is it?
- Tue Aug 26, 2008 11:13 am
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
Yes I installed the latest driver (release date: 22.08.2008, brand-new 
)
And I don't get the clip light on the front of the M-Audio! I'm not stupid...
)And I don't get the clip light on the front of the M-Audio! I'm not stupid
...- Mon Aug 25, 2008 4:04 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
I contacted the M-Audio support and they told me to buy an active usb hub for frictionless current supply.
I did that, but the problem is still the same...
I did that, but the problem is still the same...
- Sat Aug 23, 2008 8:07 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
Ok I understand...
Isn't the gain control a line-in control? Look at the picture of my soundcard...
But don't you have the probleme that you amplify the recorded noise when you normalise your recording...?
Isn't the gain control a line-in control? Look at the picture of my soundcard...
But don't you have the probleme that you amplify the recorded noise when you normalise your recording...?
- Sat Aug 23, 2008 6:26 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Re: Signal is cutted at -0,6 dB
This is the Soundcard: http://www.m-audio.com/products/en_us/MobilePreUSB-main.html And this is the mic: http://www.mxlmics.com/condenser_mic/mxl2006/mxl2006.htm Soundcard is connected via USB... It can not be a hardware problem, because under linux everything works well with absolutely the same set...
- Sat Aug 23, 2008 2:38 pm
- Forum: Windows
- Topic: Signal is cutted at -0,6 dB
- Replies: 21
- Views: 4591
Signal is cutted at -0,6 dB
Hi, I have got a problem with Audacity and Windows. How you can see in this picture, the signal is always cutted at -0,6 dB http://img166.imageshack.us/img166/4038/recah3.png In sounds distorted then. I think this is not a problem with the gain control of my mic pre amp... if I reduce gain to not re...