Easiest way to copy L channel to R channel in stereo track

Help for Audacity 2.x.x on Windows.

ImageThis forum is for Audacity 2.x.x on Windows.
Please state which version of Windows you are using,
and the exact three-section version of Audacity from "Help menu > About Audacity".


Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade at https://www.audacityteam.org/download/.
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.

Easiest way to copy L channel to R channel in stereo track

Permanent link to this post Posted by JohnMason » Wed Jan 03, 2018 1:14 am

Audacity 2.2.1, Windows 10

Hi, seems like this should be easy but I'm not sure how to do it. I digitized an old cassette recording of some live music that for some reason was recorded only on the L channel of the cassette, so now I have a .wav file that is a stereo track but only has the L channel. So when listening, sound comes only from the L speaker, headphone, etc. I'd like to make into either a mono or stereo track with the sound in both channels ...

thanks for any help!
JohnMason
 
Posts: 3
Joined: Wed Jan 03, 2018 1:05 am
Operating System: Windows 10

Re: Easiest way to copy L channel to R channel in stereo tra

Permanent link to this post Posted by kozikowski » Wed Jan 03, 2018 1:22 am

Use the drop-down menu on the left > Split Stereo to Mono. Delete the dead track.

Koz
kozikowski
Forum Staff
 
Posts: 38787
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: Easiest way to copy L channel to R channel in stereo tra

Permanent link to this post Posted by JohnMason » Wed Jan 03, 2018 1:24 am

Thanks! just in the meantime I found a couple of ways to deal with this.
cheers,
--J
JohnMason
 
Posts: 3
Joined: Wed Jan 03, 2018 1:05 am
Operating System: Windows 10

Re: Easiest way to copy L channel to R channel in stereo tra

Permanent link to this post Posted by kozikowski » Wed Jan 03, 2018 1:30 am

There are more complicated ways to do it, but two-track mono (which is what the same thing on left and right is called, is wasteful and not required.

If your job expands, if you decide you're going to add stereo effects and delay enhancements, then yes, you'll need actual stereo. Split Stereo to Mono > delete the bad track. Duplicate the one remaining track (Control-D).
Upper Drop-down menu > Make Stereo Track.

How did you do it?

Koz
kozikowski
Forum Staff
 
Posts: 38787
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: Easiest way to copy L channel to R channel in stereo tra

Permanent link to this post Posted by JohnMason » Wed Jan 03, 2018 1:38 am

first I did "mix stereo down to mono," which worked but gave me the 2-track mono result you mention; then I found a short video explaining the very solution you just explained, and used that.
thanks again,
--J
JohnMason
 
Posts: 3
Joined: Wed Jan 03, 2018 1:05 am
Operating System: Windows 10

Re: Easiest way to copy L channel to R channel in stereo tra

Permanent link to this post Posted by Elias45 » Wed Jan 03, 2018 2:53 pm

JohnMason wrote:first I did "mix stereo down to mono," which worked but gave me the 2-track mono result you mention; then I found a short video explaining the very solution you just explained, and used that.
thanks again,
--J


oh wow. pretty easy stuff. thanks for this!
Elias45
 
Posts: 5
Joined: Sat Dec 30, 2017 3:18 am
Operating System: Windows 7


Return to Windows



Who is online

Users browsing this forum: Bing [Bot] and 5 guests