How to isolate voice in a 2-mic setup

Audacity Podcaster Forum.

ImageIf you require help using Audacity, please post on the forum board relevant to your operating system:
Windows
Mac OS X
GNU/Linux and Unix-like

How to isolate voice in a 2-mic setup

Permanent link to this post Posted by pallen » Tue May 16, 2017 11:07 pm

Hey folks,

I'm producing an interview podcast. The interviews will be face-to-face in the same location. We did a test interview, using two microphones and a standalone recorder, recording on separate tracks. When I import them into Audacity, I can hear both voices on each track. (On one track, the interviewer is loud and clear, but I can still hear the interviewee faintly in the background. Vice versa for the other track.) How do I go about cleaning up each track so it only has one voice on each?

Thanks so much!
pallen
 
Posts: 2
Joined: Tue May 16, 2017 10:59 pm
Operating System: Windows 10

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by steve » Tue May 16, 2017 11:40 pm

If you want "only" one voice per channel, you need the two people in separate rooms when you record, or record each person separately (not real-time).

If "mostly" one voice per channel, physically separate the two people as much as possible, and get the mics as close as possible to the people talking. Directional microphones will help.

"Cleaning up" the recording after the event is a non-starter (as I assume you are discovering).
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)
steve
Senior Forum Staff
 
Posts: 43465
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux Debian

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by Trebor » Wed May 17, 2017 1:52 am

pallen wrote: How do I go about cleaning up each track so it only has one voice on each?

You could try squelching what should be silence, but where you can hear the other person talking ...

Audacity Envelope Tool demo.gif
Audacity Envelope Tool demo.gif (113.57 KiB) Viewed 124 times
Trebor
 
Posts: 3495
Joined: Sat Dec 27, 2008 5:22 pm
Operating System: Windows Vista

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by kozikowski » Wed May 17, 2017 4:37 am

This is how Charlie Rose does it.
Image
The "Famous Table" is not an accident. That's how the sound people keep the two performers apart. That and yes, limbo lighting is dramatic and something of a trademark for him, but the real point of the WNYC studio is it's dead quiet with no echoes. They're wearing bright, close-talking lavalier microphones and that's about as good as it gets. I assume there's still a little cross-leakage, but it's so low that it can be ignored.

So yes, the two microphones and two-channel recorder was a good idea, but I bet you shot in a live room with the actors too close and the microphones are picking up each other's wall echoes in addition to direct leakage.

You can get directional lavaliers and I enjoyed a show shot wild in New York City with them. It came off very well with the performers announcing perfectly, literally in the middle of Grand Central Station, but one of the performers tried to do something a little out of the ordinary and the track went straight into the toilet. Directional lavaliers are rough to use.

Isn't post production fun when you have cross-talk like that?

Koz
kozikowski
Forum Staff
 
Posts: 36517
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by steve » Wed May 17, 2017 10:30 am

Trebor wrote:You could try squelching what should be silence, but where you can hear the other person talking ...

and you can also automate that using the "Auto Duck" effect (http://manual.audacityteam.org/man/auto_duck.html), but whether manually or with Auto Duck you are relying on only one person talking at a time. In real life there is almost always overlap in places.
9/10 questions are answered in the FREQUENTLY ASKED QUESTIONS (FAQ)
steve
Senior Forum Staff
 
Posts: 43465
Joined: Sat Dec 01, 2007 11:43 am
Operating System: Linux Debian

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by kozikowski » Wed May 17, 2017 12:53 pm

All these tricks only work when the voices are separate during the exchange. If they like to interrupt and step on each other, that's the end of the world. Audacity cannot reliably separate instruments, voices and sounds in a mixed performance.

This is another way to shoot these things.

Image

That's a long-distance shotgun microphone used in close proximity for interviews. Ira Glass was one of the first people to do that on This American Life. Everybody looked in horror and said it would never work. Now everybody does it that way.

There's probably a Sennheiser MKH 416 inside that wind sock.

Koz
kozikowski
Forum Staff
 
Posts: 36517
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by kozikowski » Wed May 17, 2017 12:58 pm

A friend of mine did a voice job on one of these in Biscayne Bay. He was on the floor of the boat with a shotgun pointing up at the performer.

Successfully.

Screen Shot 2017-05-17 at 5.55.28.png
Screen Shot 2017-05-17 at 5.55.28.png (89.03 KiB) Viewed 109 times


Koz
kozikowski
Forum Staff
 
Posts: 36517
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by pallen » Wed May 17, 2017 5:13 pm

Thanks for the assistance, everyone. I still have a lot to learn.
pallen
 
Posts: 2
Joined: Tue May 16, 2017 10:59 pm
Operating System: Windows 10

Re: How to isolate voice in a 2-mic setup

Permanent link to this post Posted by kozikowski » Thu May 18, 2017 3:39 pm

Thanks for the assistance, everyone. I still have a lot to learn.

Field interviews have all the problems of exterior theatrical production plus multiple microphones. People who can routinely pull that off are production heroes.

Remember if you record in a restaurant you can't use anything with copyright music in the background.

About a year ago I talked to someone doing an interview here.

http://kozco.com/pix/Cathay-Pacific.jpg

I thought he was nuts. He said it was intentional and he did it for the obvious signature of the plane noise, but he was using one blast-proofed microphone in this instance (it's also windy there). Newsies use one, long-handled microphone and swap it back and forth, but they're not doing long-form interview. I'm with you. Two mics are a good idea, they just have to be managed carefully.

Koz
kozikowski
Forum Staff
 
Posts: 36517
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks


Return to Podcasting with Audacity



Who is online

Users browsing this forum: No registered users and 1 guest