Input too high

Help for Audacity 2.x.x on GNU/Linux.

ImageThis forum is for Audacity 2.x.x on GNU/Linux.
Please state:
  • which version of Linux you are using,
  • the exact three-section version number of Audacity from Help menu > About Audacity,
  • whether you installed your distribution's release, PPA version, or compiled Audacity from source code.

Audacity 1.2.x and 1.3.x are obsolete and no longer supported. If you still have those versions, please upgrade (see https://www.audacityteam.org/download/).
The old forums for those versions are now closed, but you can still read the archives of the 1.2.x and 1.3.x forums.

Input too high

Permanent link to this post Posted by pber » Sat Feb 10, 2018 2:12 am

I'm trying to record my guitar using a USB interface via JackD and the input into Audacity is too high.
From what I've read the volume is controlled by the system. I've tried that and no joy.

Here's my setup

JackD/QJackCtl
Guitarix
Audacity
Linux Mint 18.2

Everything works well on the guitarix side and far as levels going into my amp, but the input to Audacity is always overloaded. Any ideas?
pber
 
Posts: 3
Joined: Sat Feb 10, 2018 2:05 am
Operating System: Linux Mint

Re: Input too high

Permanent link to this post Posted by kozikowski » Sat Feb 10, 2018 3:06 am

Any ideas?

None of that tells us where you plugged the guitar in. If you have one of those little USB Stick interfaces, that's not going to work. Mine for example...

Image

Has a place for stereo headphones and a low volume, light duty mono microphone. You will almost set fire to it if you plug a powerful guitar into the microphone hole.

Is that what you're doing?

Koz
kozikowski
Forum Staff
 
Posts: 39129
Joined: Thu Aug 02, 2007 5:57 pm
Location: Los Angeles
Operating System: OS X 10.9 Mavericks

Re: Input too high

Permanent link to this post Posted by pber » Sat Feb 10, 2018 7:08 am

I'm using a Behringer U-Phoria UMC22 USB guitar interface. This is what this is made for. It works perfectly with Guitarix or Rakarack with the Jack Audio interface. When I select the Jack interface as the Host in Audacity (opposed to ALSA), the audio is too high and clips. I can't seem to adjust it.
pber
 
Posts: 3
Joined: Sat Feb 10, 2018 2:05 am
Operating System: Linux Mint

Re: Input too high

Permanent link to this post Posted by pber » Sun Feb 11, 2018 4:22 am

I ended up figuring it out. The issue was that the preamp effect coming out of guitarix were too high. I was able to adjust he volumes of the effects and it lowered the input into Audacity so it wouldn't clip anymore.
pber
 
Posts: 3
Joined: Sat Feb 10, 2018 2:05 am
Operating System: Linux Mint


Return to GNU/Linux



Who is online

Users browsing this forum: No registered users and 4 guests