I’m hoping someone can help, I am looking for a way to pulse a music track at a specific frequency, say 2hz.
It would either be pulsed on/off violently like a square wave, or better still have a very slight but rapid fade in/out on each pulse - so I guess to look like a square wave with slightly rounded corners. To listen to you would hear loud/nothing/loud/nothing pulsing at 2hz.
Can this be done with Nyquist?, and can anyone share the commands as I’m very new to all this…
Switching is not an option. If you rapidly switch a sound track on and off it’s almost impossible to avoid clicks and pops at the transitions. I assume you’re interested in the show going on and off only, so switching is probably not an option.
Yes, clicking is definitely to be avoided, I hoped the slight rapid fade may help. If necessary something closer to a sine wave in appearance would do, I guess it would still sound like a pulse.
Do you think anything even close can be achieved with Nyquist in Audacity?